|
|
| ·Your current location：Questions |
| FCC Testing |
| Writer：LANDER TESTING View：9528 Addtime：2007-12-11 |
What products are needed to conduct FCC test and authorized under FCC part 15C, 15V and 15 DOC?
What are the common frequencies used for RC toy?
The typical frequencies for RC toy car or toy walkie talkie are:
26.96 - 27.28MHz (typically 27.145MHz)
49.82 - 49.90MHz (typically 49.860MHz)
What documents should I provide before the testing for radio control toys?
- Letter of Agency
- FCC ID labeling artwork, size and location
- Circuit Diagram
- Block Diagram
- User manual
- Technical Description
- Certification Agreement
What is the Telecommunication Certified Bodies (TCB) review turnaround time?
The TCB review time is 2~4 weeks normally.
What is block diagram?
The block diagram composed of different blocks, each blocks represent the major functions of the circuit. Then we can link-up all blocks to represent the complete function flow of the device.
Is there any size limitation for FCC label?
For more clear indication to the user, the wording should not less than 2 mm in height.
What can I do if the size of the device is too small to put the FCC statement?
When the device is so small or for such use that it is not practicable to place the statement, the information required by this paragraph shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. However, the FCC identifier or the unique identifier, as appropriate, must be displayed on the device.
What is the requirement of the label?
The label shall not be a stick-on paper label. The label on these products shall be permanently affixed to the product and shall be readily visible to the purchaser at the time of purchase. “Permanently affixed” means that the label is etched, engraved, stamped, silk-screened, indelibly printed, or otherwise permanently marked on a permanently attached part of the equipment or on a nameplate of metal, plastic, or other material fastened to the equipment by welding, riveting, or a permanent adhesive. The label must be designed to last the expected lifetime of the equipment in the environment in which the equipment may be operated and must not be readily detachable.
Is there any change on the FCC part 15 DOC Label?
Yes, the FCC label for Declaration of Conformity was simplified from Dec, 2003. All the new application can use this label format on their product.
How can I design my FCC ID?
An FCC ID, which should be printed in the following format with legible lettering.
FCC ID: XXXABCDEFG “FCC ID” - in capital letters on a single line XXX - your grantee code as assigned by the FCC. ABCDEFG - up to 14 alphanumeric characters you select. Dash or hyphen (-) can be used. No spaces are allowed.
What is the content of the FCC part 15C label?
 |
| Online advice |
|
|
|
| 
